View EGP20D_182780.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EGP20A THRU EGP20G
GLASS PASSIVATED FAST EFFICIENT RECTIFIER
Reverse Voltage - 50 to 400 Volts
* D
DO-204AC
Forward Current - 2.0 Amperes
FEATURES
Plastic package has Underwriters Laboratories Flammability Classification 94V-0 Glass passivated cavity-free junction Superfast recovery time for high efficiency Low forward voltage, high current capability Low leakage current High surge current capability High temperature metallurgically bonded construction High temperature soldering guaranteed: 300C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension
P A T
E
N
T
E
0.034 (0.86) 1.0 (25.4) MIN. 0.028 (0.71) DIA.
0.300 (7.6) 0.230 (5.8)
0.140 (3.6) 0.104 (2.6) DIA. 1.0 (25.4) MIN.
MECHANICAL DATA
Case: JEDEC DO-204AC molded plastic over solid glass body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.015 ounce, 0.4 gram
(R)
Dimensions in inches and (millimeters)
*Glass-plastic encapsulation technique is covered by
Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25C ambient temperature unless otherwise specified.
SYMBOLS
EGP 20A
EGP 20B
EGP 20C
EGP 20D
EGP 20F
EGP 20G
UNITS
Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55C Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load Maximum instantaneous forward voltage at 2.0A Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range TA=25C TA=125C
VRRM VRMS VDC I(AV)
50 35 50
100 70 100
150 105 150
200 140 200 2.0
300 210 300
400 280 400
Volts Volts Volts Amps
IFSM VF IR trr CJ RJA RJL TJ, TSTG 70.0 0.95
75.0 1.25 5.0 100.0 50.0 45.0 40.0 15.0 -65 to +150
Amps Volts A ns pF C/W C
NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient, and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted
4/98
RATINGS AND CHARACTERISTIC CURVES EGP20A THRU EGP20G
FIG. 1 - MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT
3.0
PEAK FORWARD SURGE CURRENT, AMPERES
RESISTIVE OR INDUCTIVE LOAD 0.375" (9.5mm) LEAD LENGTH
90 75 60 45 30 15 0
TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method)
2.0
1.0
0 0
25
50
75
100
125
150
175
AMBIENT TEMPERATURE, C
1
10
NUMBER OF CYCLES AT 60 Hz
100
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
100
50 PULSE WIDTH=300s
INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES
1% DUTY CYCLE
INSTANTANEOUS FORWARD CURRENT, AMPERES
10
TJ=150C
10
TJ=150C
TJ=25C
1
TJ=125C
1
0.1
TJ=75C
0.1
0.01
TJ=25C
EGP20A - EGP20D EGP20F & EGP20G
0.01 0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
0.001
0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE, CW
140
JUNCTION CAPACITANCE, pF
120 100 80 60 40 20 0 0.1
EGP20A - EGP20D EGP20F & EGP20G
TJ=25C f=1.0 MHz Vsig=50mVp-p
100
10
1
1
10
100
1,000
0.1 0.01
0.1
1
10
100
REVERSE VOLTAGE, VOLTS
t, PULSE DURATION, sec.

▲Up To Search▲

Price & Availability of EGP20D

	To Download EGP20D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .